I thought the usual advice for monitor calibration with LCD panels was the avoid using any of the adjustments except for brightness because the other adjustments are most likely implemented in software on the display with a limited number of bits. Better to just calibrate one time and minimize quantization error instead of calibrating once on the monitor and then again on the computer.
On 3/23/2010 9:02 AM, adam k wrote:
But in this case I won't have any adjustments available. Or am I missing something Sent by AAK from iPhone 3Gs On Mar 22, 2010, at 11:58 PM, "Jürgen Lilien" <jp.lilien@xxxxxxxxxxxxxx> wrote:I wrote:Do not use the U2410 custom color mode as the base to calibratethe monitor,use the AdobeRGB mode instead.Or better use the "standard mode". Regards, Juergen
