[arachne] Re: hi speed connect
- From: destiny2b@xxxxxxxxxxxxxxx
- To: arachne@xxxxxxxxxxxxx
- Date: Fri, 13 Oct 2006 23:00:23 MST
Arachne at FreeLists---The Arachne Fan Club!
Tried both, packets statistics 0 in 161 out no errors. When connecting to
url Arachne times out. Using CUTE telnet and ftp gives error
message:
no response from bootp server, error initializing network or getting
configuration file.
Cal
** Reply to note from "Glenn McCorkle" <glennmcc@xxxxxxxxxx> Fri, 13 Oct 2006
21:28:07 -0500
>
> Just for the heck of it, try this......
>
> [tcp/ip] IP_Address 192.168.0.2 IP_Grab IP address set to NameServer
> 209.226.175.152 AltNameServer 209.226.175.236 Gateway
> 0.0.0.0 AltGateway 0.0.0.0 Netmask 0.0.0.0 TCPconfig lantcp.cfg
>
> And now that you have the correct DNS numbers.
>
> Also try....
>
> [tcp/ip] IP_Address BOOTP IP_Grab IP address set to NameServer
> 209.226.175.152 AltNameServer 209.226.175.236 Gateway 0.0.0.0
> AltGateway 0.0.0.0 Netmask 0.0.0.0 TCPconfig lantcp.cfg
>
> > Trying out new Belkin pcmcia network card while at hotel. Uses Realtek 8139
> > chip. Have card up and running using ne2000.com and a card
> > enabler. Could not connect via bootp. Called hotel tech support and had
> > them
> > issue a static ip. Arachne says I am online and tech support sees my
> > packets coming through. Packet stats indicate all packets going out but
> > nothing coming in. Is it possible Arachne needs a router even when one
> > has a static ip? Below are config items as well as lantcp.cfg and
> > wattcp.cfg:
>
Arachne at FreeLists
-- Arachne, The Premier GPL Web Browser/Suite for DOS --
Other related posts:
