[arachne] Re: hi speed connect
- From: "Glenn McCorkle" <glennmcc@xxxxxxxxxx>
- To: arachne@xxxxxxxxxxxxx, arachne@xxxxxxxxxxxx
- Date: Fri, 13 Oct 2006 21:28:07 -0500
Arachne at FreeLists---The Arachne Fan Club!
Just for the heck of it, try this......
[tcp/ip]
IP_Address 192.168.0.2
IP_Grab IP address set to
NameServer 209.226.175.152
AltNameServer 209.226.175.236
Gateway 0.0.0.0
AltGateway 0.0.0.0
Netmask 0.0.0.0
TCPconfig lantcp.cfg
And now that you have the correct DNS numbers.
Also try....
[tcp/ip]
IP_Address BOOTP
IP_Grab IP address set to
NameServer 209.226.175.152
AltNameServer 209.226.175.236
Gateway 0.0.0.0
AltGateway 0.0.0.0
Netmask 0.0.0.0
TCPconfig lantcp.cfg
On Fri, 13 Oct 2006 20:53:01 MST, destiny2b@xxxxxxxxxxxxxxx wrote:
> Trying out new Belkin pcmcia network card while at hotel. Uses Realtek 8139
> chip. Have card up and running using ne2000.com and a card
> enabler. Could not connect via bootp. Called hotel tech support and had
> them
> issue a static ip. Arachne says I am online and tech support sees my
> packets coming through. Packet stats indicate all packets going out but
> nothing coming in. Is it possible Arachne needs a router even when one
> has a static ip? Below are config items as well as lantcp.cfg and
> wattcp.cfg:
> arachne.cfg
> Connection READY
> [tcp/ip]
> IP_Address 10.255.220.78
> IP_Grab IP address set to
> NameServer 209.226.175.152
> AltNameServer 209.226.175.236
> Gateway 10.255.1.1
> AltGateway 72.38.41.129
> Netmask 255.255.0.0
> TCPconfig lantcp.cfg
> All numbers from tech support and they can see my packets coming through. Alt
> Gateway is from hotel router, Gateway from isp. Changing
> around was no change
> Called a friend who I had setup Arachne on a cable modem. Used his wattcp.cfg
> which is different from standard. Still nothing. Tech support could
> not give me a domain name, but checking hotel gateway for host info gave me
> domain name below. Don't believe I should need one with static.
> lantcp.cfg
> netmask=255.255.0.0
> gateway=10.255.1.1
> nameserver=209.226.175.152
> nameserver=209.226.175.236
> domainslist="cgocable.net"
> hostname=arachne
> sockdelay=30
> mss=1024
> Do not believe I needed to add info in above file from arachne.cfg but tried
> it
> anyway. No luck!
> wattcp.cfg
> # Text printed to screen (stdout).
> #
> #print = "Waterloo TCP/IP setup" ; optional key/value
> pkt.vector = 0x60 ; optional
> my_ip = $(MYIP)
> netmask = $(NETMASK)
> nameserver = 209.226.175.152 ; secondary DNS, optional
> nameserver = 209.226.175.236
> gateway = $(REMIP)
> domain_to = 0 ; optional
> dynamic_host = 0 ; optional
> inactive = 0 ; optional
> datatimeout = 120 ; optional
> debug = 0 ; optional
> #mss = 1460 ; optional
> #mss = 512 ; optional
> # Default value is 1500.
> #
> #mtu = 1500 ; optional
> #mtu = 552 ; optional
> The other box with Arachne on cable seemed to go nowhere without a router but
> am guessing on that. Can someone confirm this?
> See anything I am missing?
> Cal
--
Glenn
http://www.delorie.com/listserv/mime/
http://www.cisnet.com/glennmcc/
http://www.law.cornell.edu/constitution/constitution.table.html
Arachne at FreeLists
-- Arachne, The Premier GPL Web Browser/Suite for DOS --
Other related posts:
