[amayausers.com] Re: re-engaging bobbin sensor
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Thu, 22 Mar 2012 22:10:35 UT
This message was posted by Rod or Sharon on AmayaUsers.com. PLEASE DO NOT REPLY
VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/1320.html#000004
Herb is right...
Back when the first Amayas came out, the software we started with was Version
4.00.xxx.
With Ver 4--5--6-- whenever a cap driver was selected in the hoop section, a
popup immediately came up that instructed you to "disable" the bobbin detect.
This was just part of the cap sewing process.
Somewhere in either the Ver 6 or 7 this popup no longer came up...my mind is a
bit fuzzy on just when...doesn't matter. The point is, this use to a normal
thing to do. Now that more information has been supplied, it makes more sense
as to why the tech said to disable the bobbin detect.
As Herb has indicated, in Tools, Settings, this can be turned off and on at
your conveinence, and yes when it is turned off you do have to babysit the
machine, altho you can utilize the "Bobbin Counter" tool to stop the machine
after a certain stitch count of your choosing...
Rod Springer
Amaya Tech & Trainer
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
