[amayausers.com] Re: re-engaging bobbin sensor
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Thu, 22 Mar 2012 16:28:24 UT
This message was posted by tallcottongraphics on AmayaUsers.com. PLEASE DO NOT
REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking
here: http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/1320.html
We were having problems with false bobbin breaks and our tech said he could
disengage the bobbin sensor, which he did. This was fine when we were doing a
lot of hats, just kept checking the bobbin between stitching. However he did
not show us how he did it.
Now we are in the process of doing quite a few large patches and of course the
bobbin runs out before the patch is stitched out which causes a big mess
especially if we don't catch it right away.
How do we re-engage the bobbin sensor so we don't have to watch the machine
constantly?
Thanks.
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
