[amayausers.com] Re: polyester basketball shorts
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Fri, 14 Aug 2009 18:30:06 UT
This message was posted by The Embroidery Authority on AmayaUsers.com. PLEASE
DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by
clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/2/1012.html#000001
Make sure you are using two layers of cut a way backing and try choosing
"Standard Acti-feed" instead of Auto. You will have to choose a number
relative to the thickness of the puff foam. Start around 10 - 15 and adjust as
necessary. If you are getting too many false thread breaks, lower the number.
If the stitches look too tight, raise the number.
Make sure you are using a sharp needle - for cutting of the foam.
Ed
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
