[amayausers.com] Re: mis trims
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Fri, 26 Feb 2010 16:42:40 UT
This message was posted by The Embroidery Authority on AmayaUsers.com. PLEASE
DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by
clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/881.html#000005
CMack,
If the machine isn't trimming consistantly, there could be a number of
contributing factors and an experienced tech chases them down one by one.
My first thoughts are that you may simply have a lot of debris trapped between
the knives. If you have already cleaned this area, then the troubleshooting
would have to begin.
If you do decide to purchase new trimmer blades, know that they are going to be
between $40 and $50 bucks a piece. (There's two knives)
After you install the knives, they then have to be calibrated for optimal
function and to prevent premature failure and/or wear.
If you happen to install new blades and the machine trims with success, and for
many years, that would be nothing short of simply "great".
Wishing you the best.
Ed
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
