[amayausers.com] Re: mis trims
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Wed, 24 Feb 2010 17:35:50 UT
This message was posted by The Embroidery Authority on AmayaUsers.com. PLEASE
DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by
clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/881.html#000002
Remember that if the machine doesn't trim and the thread gets pulled to one
side until it breaks, there's a great chance that the needle that was bent
sideways now needs to be replaced.
Have your machine looked at by a tech.
I really doubt it's your cutter blade(s) as they are rarely the cause of
trouble. (Depending on how old the machine is.)
Which machine do you have? Amaya, Amaya XT, etc... It makes a difference as
they have different cutting systems.
Ed
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
