[amayausers] Re: fast frame question
- From: "Roland R. Irish III" <signman@xxxxxxxxxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Thu, 04 Aug 2005 08:21:26 -0400
I'll bet you are all having trouble removing the set screws because the
factory would most likely use LocTite (similar to superglue) on all the
bolts and screws-it keeps anything from 'vibrating' loose. A 'sharp' torque
with the wrench should 'break' that glue hold and release it. Heat also does
it-if you really had to, a blow dryer would heat up the bolt and help loosen
the glue. Definitely have a GOOD allen wrench-no worn edges-and hold it
straight and secure. If you round off a setscrew the only way to get it out
is to drill it out and use an extractor-and that would be real hard to do
without flipping the Amaya on its back.
If you know a good auto mechanic- one with big hands and isn't a dummy-he'd
know how to do it right-similar stuff on engines.
Roland
Other related posts:
