[amayausers] Re: false bobbin breaks. metallic thread breaks
- From: "Linen Barn" <linen@xxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Mon, 12 Jun 2006 14:40:02 -0700
You shouldn't have to but it wouldn't hurt to try just to see if its any
better. I think since I have been running the auto-feed I have switched
back to manual maybe 2 times.
R/A is Robison-Anton. I use mostly R/A thread and quite a bit of Madiera
but the Madeira Metallic does not work well for me, I like the R/A Metallic.
Aaron Sargent
The Linen Barn
linen@xxxxxxxxxxx
541-770-2957
Medford, OR
----- Original Message -----
From: "Kesavan" <kesavan@xxxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Monday, June 12, 2006 2:28 PM
Subject: [amayausers] Re: false bobbin breaks. metallic thread breaks
> Aron,
>
> I thought so. So should I try manual
>
> Anand
>
>
>
> If you use auto-actifeed then you can't change the Material Thickness.
>
> Aaron Sargent
> The Linen Barn
> linen@xxxxxxxxxxx
> 541-770-2957
> Medford, OR
> ===========================================================
>
> The AmayaUsers Mailing List
> Website: http://www.amayausers.com
> Discussion Board: http://www.amayausers.com/boards
> Subscribe/Unsubscribe: http://www.amayausers.com/list
>
> ===========================================================
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
