Hello All, I wanted to check with you to see if anyone has the same problem as me. When I do small lettering, my bobbin thread seems to slide off to the left. (In class we learnt, it should be 30,60,30 with the bobbin thread in the middle.) This some times causes the bobbin thread to show up on the front of the design causing dandruff. The tech checked it and said everything looks fine with regards to the bobbin positioning and so on. But every time I do small lettering, I see the dandruff. I was sewing out the easy care shirt maroon color and the white thread showed up so clearly. The tech suggested that I tighten the bobbin completely and increase the material thickness to counter that and it would solve the problem. (For a easy care shirt, the MT was 7). To me, this was not a solution, but a work around. Do any of you have this problem? How did you solve it or do you just live with it. I would be interested to hear what you all have to say. Best Regards, Veena Viswanath Iris Embroidery www.IrisEmbroidery.com (510)-226-6171