[amayausers.com] Re: Z Axis Time Out error
- From: "r.rinehartsr" <drader@xxxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Wed, 2 Apr 2008 13:12:05 -0500
Tom,
If you decide to get a tech in to check your problem, let me know cuz I think
my sensor is going out. Needle 16 & 15 are both down. They just have one
false thread break after another. Is your machine under warrenty? Mine is
just 9 months old and they will probably assign a guy to come out and check my
machine. But, maybe since he is in the area, he may come by and see you at the
same time. Feel free to call at the number below if you need more info!
Debbie Rinehart
Deb'z-N-Stitches
www.debznstitches.com
765-342-7392
----- Original Message -----
From: Tom Ladow
To: amayausers@xxxxxxxxxxxxx
Sent: Wednesday, April 02, 2008 9:08 AM
Subject: [amayausers.com] Re: Z Axis Time Out error
Debbie;
I think this problem is a bit more complicated than the Z Error message
itself. I have reset design, turned off machine, hit the E Button, etc. The
machine comes back to life OK and the message is gone but when I start sewing,
the needle hits the thread cutter blades in the needle hole and breaks off and
of course the error message reappears.. It seems as though the cutter blades
are not retracting out of the way, then I get the Z Error message again when
the needle hits the top of the blades.. I tried resetting the cutter blades
with the arrows, but they don't move. I hit the Trim Immediate command, but
they still don't move.
------------------------------------------------------------------------------
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of r.rinehartsr
Sent: Wednesday, April 02, 2008 11:17 AM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers.com] Re: Z Axis Time Out error
Tom, Sometimes I hit the e button and when I release it, all is fine! But, I
have also had to reset design on occasion, but if you do that make sure you
write down the stitch # you are on and the position of design!!! Debbie in
Martinsville. HTH
Debbie Rinehart
Deb'z-N-Stitches
www.debznstitches.com
765-342-7392
----- Original Message -----
From: Tom Ladow
To: amayausers@xxxxxxxxxxxxx
Sent: Wednesday, April 02, 2008 8:26 AM
Subject: [amayausers.com] Z Axis Time Out error
I have a Z axis Time Out error message on my screen. I have turned off
machine and restarted computer and machine but the message is still there.
Any ideas?
Tom L.
Indiana
-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of
webmaster@xxxxxxxxxxxxxx
Sent: Monday, March 31, 2008 5:14 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers.com] Re: Patches
This message was posted by Carolyn on AmayaUsers.com. PLEASE DO NOT REPLY
VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/6/89.html
Hello everyone, I am looking for patches that will fit on the back of
motocyle jackets. The straight or curved ones. I hope someone gets what i
am talking about. I am probably not describing them correctly.
Please help
Carolyn
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
