[amayausers.com] Re: Z Axis Time Out error
- From: "Tom Ladow" <tcladow@xxxxxxxxxxxxxxxxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Wed, 02 Apr 2008 10:08:19 -0400
Debbie;
I think this problem is a bit more complicated than the Z Error message
itself. I have reset design, turned off machine, hit the E Button, etc.
The machine comes back to life OK and the message is gone but when I start
sewing, the needle hits the thread cutter blades in the needle hole and
breaks off and of course the error message reappears.. It seems as though
the cutter blades are not retracting out of the way, then I get the Z Error
message again when the needle hits the top of the blades.. I tried
resetting the cutter blades with the arrows, but they don't move. I hit the
Trim Immediate command, but they still don't move.
_____
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of r.rinehartsr
Sent: Wednesday, April 02, 2008 11:17 AM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers.com] Re: Z Axis Time Out error
Tom, Sometimes I hit the e button and when I release it, all is fine! But,
I have also had to reset design on occasion, but if you do that make sure
you write down the stitch # you are on and the position of design!!! Debbie
in Martinsville. HTH
Debbie Rinehart
Deb'z-N-Stitches
www.debznstitches.com
765-342-7392
----- Original Message -----
From: Tom Ladow <mailto:tcladow@xxxxxxxxxxxxxxxxxxxxxxxxxx>
To: amayausers@xxxxxxxxxxxxx
Sent: Wednesday, April 02, 2008 8:26 AM
Subject: [amayausers.com] Z Axis Time Out error
I have a Z axis Time Out error message on my screen. I have turned off
machine and restarted computer and machine but the message is still there.
Any ideas?
Tom L.
Indiana
-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of
webmaster@xxxxxxxxxxxxxx
Sent: Monday, March 31, 2008 5:14 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers.com] Re: Patches
This message was posted by Carolyn on AmayaUsers.com. PLEASE DO NOT REPLY
VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/6/89.html
Hello everyone, I am looking for patches that will fit on the back of
motocyle jackets. The straight or curved ones. I hope someone gets what i
am talking about. I am probably not describing them correctly.
Please help
Carolyn
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
