[amayausers] Re: XT Thread flap
- From: webmaster@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Sun, 4 Mar 2007 01:09:54 UT
This message was posted by Rod or Sharon on AmayaUsers.com. PLEASE DO NOT REPLY
VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/1/69.html#000003
Kerry,
Auto-Acti-feed has been an evolving thing. Don't be afraid to try it . Trainers
and tech's must be careful in how we impart information to Amaya users. Just
because "a trainer" told you something at some time, it does not mean that it
will always be that way. Things change pretty rapidly in this businedd at
times....Auto was having some teething problems in the early stages, but Melco
has come a long way with it, mostly with software changes. I have an older
Amaya and an XT and the Auto is working very well on both of them.
When working with Standard, remember that each level of material thickness is
about the thickness of a piece of typing paper. For two layers of medium weight
backing an MT of 3 is usually about right....learn how to use "Settings by
Color" in OS. It allows you to customize each needle to different speeds, MT's,
column width, run/fill, etc, and it allows you to select which needles you want
to be running on Standard and which you want to be running on Auto....applies
to newer sofeware releases.
Rod Springer
Melco Tech & trainer
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
