This message was posted by The Embroidery Authority on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/880.html#000003 Kevin, The top thread is supposed to rub against the bobbin case. So this is probably not your issue. Chances are your trimmer assembly needs an adjustment. Loosen the top screw and ever so gently move the front of the assembly to the right just a hair. Then tighten the screw. If you move it too far, the trimmer won't trim correctly. Best of luck. Ed =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================