[amayausers.com] Re: Thread pulling out
- From: Darlene Weber <image_maker31@xxxxxxxxx>
- To: amayausers@xxxxxxxxxxxxx
- Date: Wed, 2 Apr 2008 14:54:28 -0700 (PDT)
Aaron,
My threads pull out on everything, not just alphabets!!
Will this work for the designs as well??
Thanks
Linen Barn <linen@xxxxxxxxxxx> wrote:
v\:* { BEHAVIOR: url(#default#VML) } o\:* { BEHAVIOR:
url(#default#VML) } w\:* { BEHAVIOR: url(#default#VML) } .shape {
BEHAVIOR: url(#default#VML) } In Design Shop go to Tools ....
Convert Alphabets Then towards the bottom is a box that says Remove Locks.
CLick that box. After you do this there should be no locks in the stock
embroidery fonts so its up to you to make sure your settings in lock/.trim are
correct.
To put them back in go to tools ..... restore alphabets (pretty sure this
is the right place)
Aaron Sargent
The Linen Barn
linen@xxxxxxxxxxx
541-770-2957
Medford, OR
----- Original Message -----
From: Magalis Fernandez
To: amayausers@xxxxxxxxxxxxx
Sent: Tuesday, April 01, 2008 5:21 PM
Subject: [amayausers.com] Re: Thread pulling out
Aaron,
How do you take out the factory ties on the Melco fonts?
Maggie
----- Original Message -----
From: Linen Barn
To: amayausers@xxxxxxxxxxxxx
Sent: Tuesday, April 01, 2008 1:27 PM
Subject: [amayausers.com] Re: Thread pulling out
Usually part of the problem is improper tie ins and tie outs. On all my
Melco fonts I took out the factory ties and then add my own every time. THis
prevents having 2 tie ins or outs and ensures using ones I know work well.
Uncer Trim/Lock I use Tie In and Tie Off, Only when necessary. Tie In Type 3
with Num Stitches 4, Tie Out I use style 5 with Num Stitches 4 and I use a .25"
for the trim setting. These trim setting also are used for anything I
digitize.
Now if you are having problems on designs you had digitized and you can't
make adjustments cause they are dst files then your digitizer needs to work
with you to find settings that work. I rarely have this problem with digitized
designs and the ones I setup I rarely have the pullouts anymore either. The
above settings for tie's were given to me from a Melco tech who tested diffent
ones and found them to work best for him.
This is not the only cause of this problem but this seemed to help my
machines quite a bit. If your cutting knife is out of adjustment that could
cause it also. Other cause would probably be best for a tech to jump in.
Aaron Sargent
The Linen Barn
linen@xxxxxxxxxxx
541-770-2957
Medford, OR
----- Original Message -----
From: r.rinehartsr
To: amayausers@xxxxxxxxxxxxx
Sent: Tuesday, April 01, 2008 2:54 PM
Subject: [amayausers.com] Re: Thread pulling out
Yup, me too! And on occasion, it doesn't cut at all and then the needle
breaks!! Yipee!! So, does anyone know how to keep this from happening????
Debbie Rinehart
Deb'z-N-Stitches
www.debznstitches.com
765-342-7392
----- Original Message -----
From: Metro Monograms
To: amayausers@xxxxxxxxxxxxx
Sent: Tuesday, April 01, 2008 3:05 PM
Subject: [amayausers.com] Re: Thread pulling out
This happens to me frequently. It appears as though the trim isn?t
completing before the tension on the thread increases causing the thread to pop
out of the needle when it finally breaks from the last stitch. Most annoying!
Steve
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Darlene Weber
Sent: Tuesday, April 01, 2008 4:00 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers.com] Re: Thread pulling out
It is coming out immediately after trimming!
DLCompton@xxxxxxx wrote:
Is it coming out after the trim or when it starts to stitch again? If it's
the latter, check your inching stitch count (look under Settings, Machine); you
may want to increase it (e.g. if on 3, set to 5 or 7; if 5 change to 9).
Dorothy Compton, Owner
Bee Embroidered
www.BeeEmbroidered.com
(916) 635-7467
Embroidery, Screenprinting, Rhinestones, Vinyl
In a message dated 4/1/2008 7:48:36 A.M. Pacific Daylight Time,
image_maker31@xxxxxxxxx writes:
Can someone tell me what would be causing the thread to pull out of the
needle after a trim???
Thanks!
---------------------------------
You rock. That's why Blockbuster's offering you one month of Blockbuster
Total Access, No Cost.
---------------------------------
Create a Home Theater Like the Pros. Watch the video on AOL Home.
---------------------------------
You rock. That's why Blockbuster's offering you one month of Blockbuster
Total Access, No Cost.
---------------------------------
You rock. That's why Blockbuster's offering you one month of Blockbuster Total
Access, No Cost.
Other related posts:
