[amayausers.com] Re: Thread
- From: "Kushnerick" <bkushner@xxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Thu, 24 Jan 2008 00:19:43 -0700
If all the threads look slightly frayed, then that may suggest a burr / rough
spot on your rotary hook or perhaps thread which is getting overly dry.
Run the tip of your finger nail or a q-tip over the rotary hook to check for
rough spots.
If you think your threads are getting dry, as a quick fix you can put them in
the freezer overnight. As a more permanent solution, invest in a humidifier to
raise the humidity in the room where you keep your thread.
Bob
----- Original Message -----
From: Darlene Weber
To: Amaya
Sent: Wednesday, January 23, 2008 3:22 PM
Subject: [amayausers.com] Thread
Everyone,
I notice that when I get done sewing a design, that the thread has a tendency
to look frayed on the top when I am trimming some threads. I use ARC threads.
All colors look this way. I keep all threads out of light. Actually they are
kept in a cupboard until they are on the machine.
I change needles frequently!
What is causing this??
Thanks for your help!
------------------------------------------------------------------------------
Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.
Other related posts:
