[amayausers.com] Re: Tech..What should they Check?

This message was posted by Freeman78_italy on AmayaUsers.com. PLEASE DO NOT 
REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking 
here: http://www.amayausers.com/boards/ultimatebb.php?/topic/1/676.html

Hi,
just purchased an used XT (big red but XT ).It's a 2yrs old one and the studio 
that sold me before sending has requested an Official Melco tecnician to revise 
it.The tecnician came, i was there, and he checked and oiled only some 
parts.Then he tested 2 embroidery with 2 colors on 2 needles (1 and 2) and once 
they were completed he said the machine was ok for him.I'm a newbie on 
embroidery, but spent last 3 weeks testing it and backing garments, reading 
book and moreover trying to embroid.The machine has HEAVY thread breaks 
problems....i can't complete a slightly complex embroidery, it breaks thread 
minimum 4 times, max 16 times....a 5000 stitches took me 1hr and half to 
make.Also sometimes the cutter doesn't trim proerly, and had also a thread 
break just after the cut when it works.I'm really worried, and i called the 
tech asking to come again and check the machine to test it better and 
inspect.What do you suggest? I have pre-made embroidery that i already made in 
other facil
 ities successfully and here always give some sort of problems.I changed 
needles and tested on piquet knit with proper backing, also on t-shirts and 
stronger cotton jersey.All the same.Any suggestion? Is the amaya the right 
choice or do i have to quit before starting because it's a normal thing? The 
machine has to be productive i think, and i want also to use for complex 
creations.I was thinking to ask the tech to change and check all the rollers 
and the cutter.
Thanks in advance,
Fab

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

===========================================================

Other related posts: