[amayausers.com] Re: Speaking About Loud Hammering Noises...
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Tue, 22 Sep 2009 22:16:06 UT
This message was posted by Rod or Sharon on AmayaUsers.com. PLEASE DO NOT REPLY
VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/1/788.html#000004
Ed,
Ok....close the grabber into the trap.....now go into Maintenance, Stepperss
and in the Grabber column, left click on the "Step < " tab in this column
untill you start to see the grabber start to move out.....may take 10 to 20
clicks or so....now hit the Emergency Stop.....it should now be out of any
locked position so you can move it manually...
As far as part names, the Parts and Tech CD is very easy to use and will give
one all the information they need to properly identify any part in the machine
by name.
Rod Springer
Amaya Tech & Trainer
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
