This message was posted by Rod or Sharon on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/2/1315.html#000007 I looked at .65 height and 43% width with a long name and I believe it is just too much distortion, too scrunched up....I did not sew it out. As for the font in it's original non-modified state, I would first try putting in 130% pull comp plus 4 points pull comp on the X, Y side and 20 points of minimum pull comp. On the lettering page I would change the stitch length to 18pts. For lock stitch, try style 5 for both. For underlay, a zig zag at 15 pt density and 70% border width. Density was set at 4.8. All this and then would tweak it from there. But to take all of this and then scrunch it to 43% of its width, I doubt if it will ever sew as clean as you want it to....I did not sew this out, just looked at the screen from experience. Rod Springer Amaya Tech & Trainer =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================