[amayausers] Re: (No Date: Thu, 15 Dec 2005 10:07:26 -0600
- From: "Ed Orantes" <e3m@xxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
Ruth,
Two things,... Either it's bobbin showing up on the top side of the
cap...-- tighten your bobbin and increase your material thickness to
accommodate.
or
It's the buckram that is showing itself in all of the needle
penetrations. Buckram is the hot glue like substance that is used in the
cap for face stability. We sometimes have to hit the cap with a felt lint
brush to "clean up" the face of the cap following the embroidery.
If your so called "dandruff" in only concentrated in one area of the cap
or design, then you will either need to change the settings in the software
or have the design edited for caps. Would have to see it to be sure.
Is there another term we can use other than dandruff? How about
something like "powered sugar". Yeah, in the holiday spirit.
Ed
-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx]On Behalf Of Ruth Williams
Sent: Wednesday, December 14, 2005 5:42 PM
To: Amayausers
Subject: [amayausers]
Hello Everyone,
I am doing caps and it looks like dandrift falling on my caps. They are
black caps. I've never known this to happen before or else I just never saw
it like it shows up on black. Anyone know about this?
Ruth lrembroidery@xxxxxxxxx
Other related posts:
