Hello,
ErinsExpressions has just posted in the Embroidery / How Do I? forum of
AmayaUsers Discussion Boards under the title of Crazy Topping Question.
This thread is located at
http://www.amayausers.com/discussion/showthread.php?6232-Crazy-Topping-Question
Here is the message that has just been posted:
***************
We primarily sew baseball style hats. We recently added some
performance/polyester hats that have mesh type holes (think of basketball
shorts fabric). We are having an issue with the stitches falling into the holes
and seeing "hat" through some of the stitches (particularly designs in an oval
shape and rectangle shape that have alot of fill stitches). The hats are almost
always navy or black. We use solvy and it works fair. We had the bright idea to
try putting a piece of 2.5 oz. backing underneath the design when we tested
white thread for the fill stitches. It worked great! No hat showed through -
very nice design. BUT - this does not work for the designs with other colors -
red, royal blue, etc. You can see the white through. Even black didn't work for
some colors.
Does anyone know of a tear away type of stabilizer or something similar that is
offered in colors that might be able to be used for the purpose?
***************
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
