Ed, When I have to use small spools on the Amaya, melcomart.com sends me a small cardboard circle to put over the top of it. If you don't use Melco, Just cut a 2 1/2" circle and put a hole in the middle just big enough to accommodate the cone shaft. Sincerely, Greg Cannon -----Original Message----- From: amayausers-bounce@xxxxxxxxxxxxx [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of theboards@xxxxxxxxxxxxxx Sent: Monday, July 13, 2009 1:44 PM To: amayausers@xxxxxxxxxxxxx Subject: [amayausers.com] Re: Is There an Adapter for Small Thread Spools? This message was posted by edr on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/1/729.html Hi All, I have 60 Pfaff Hummel designs (some of them: http://www.pfaffusa.com/82_3407.html) that use Mettler Metrosene thread (http://www.createforless.com/Mettler+Metrosene+All+Purpose+Thread+164+y d+159/pid22178.aspx?SI=6b5e0d38-88ab-461f-afce-b1868304c100) for its matt appearance. Embroidering these designs was one of the projects I bought the Amaya for because I wanted to add an embroidered frame to each one of them and the hoops of my home machines are not large enough. However, when I tried to put one of these spools on the Amaya, I found thread posts of the Amaya were too large for the small hole of the spool. Is there an adapter that I can use to be able to use these spools on the Amaya? I'm lovin' this machine! Thanks! Ed =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list =========================================================== ========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list =========================================================