This message was posted by levelbest on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/3/332.html#000002 Dunno - I would get everyone to sign with a fat black sharpie on an 8x10 sheet. Tell them to sign big. Then scan that in. From there, take it into illustrator/corel draw and have it create vector art using the "live trace" tool. Clean & delete any stray marks. From there, bring it into Design shop and see how the auto digitizing works. I would think that satin stich columns would look best. Anyway, that's probably how I'd give it a shot. Getting a good scanable signature (big and fat) is gonna be key. Another way would be to approach it as a "full jacket back". Get the dimensions you want the design to be, aquire a piece of paper or even posterboard in that size and tell eveyone to sign it - keeping the signatures large and spread out. Then scan it in (probably would have to do it in pieces) and send it off to a digitizer as a full jacket design. You might even consult the digitizer how best to do this to keep the cost down. Either way, I hope you are getting a fair chunk of change for this, as it's going to take a lot of time. =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================