Wendy, I ended up taking Sunday off and just got your message. I can still sew it out if you would like, but you need to send the attatchment directly to me as amayagroup will delete attatchments. Aaron Sargent The Linen Barn linen@xxxxxxxxxxx Medford, Oregon ----- Original Message ----- From: "wl solomonson" <wlsolomonson@xxxxxxxxxxx> To: <amayausers@xxxxxxxxxxxxxxxx> Sent: Sunday, March 07, 2004 7:29 PM Subject: Re: [amayausers] Frustrated!!!!!! > Aaron, > Thanks for responding although I'm a day late. I took a break from my > machine yesterday to get refocused and calmed down a bit. Tonight I give it > a whirl at a 7 material thickness to see how the design looks and made it > through the whole thing with only one threadbreak. I'm still not sure I like > the looks of it but will take a better look in the morning when the lighting > is better. I've attached the file in case you might have a chance to sew it > out too, you could just sew the lettering and skip the design, that sews > fine. > I have an order of 6.5 ounce med. blue denim shirts that this goes on so the > lettering has to be white otherwise it is usually the same blue as in the > design. It's for my regular employer so naturally I want them to look > great!!!! > Any suggestions you have would be much appreciated or if you think I am > being over critical I need to know that too!!! > Thanks, > Wendy > Itchin' To Stitch > MN > > >From: "Linen Barn" <linen@xxxxxxxxxxx> > >Reply-To: amayausers@xxxxxxxxxxxxxxxx To: <amayausers@xxxxxxxxxxxxxxxx> > >Subject: Re: [amayausers] Frustrated!!!!!! > >Date: Sat, 6 Mar 2004 14:17:38 -0800 > > > >Wendy, > > > >I run denims at 7-8 material thickness. I am getting ready to leave for > >the > >day so I can't sew it for you today. I will be working tomorrow and could > >sew it then if that is not too late for you. It is very hard to get small > >text with serif's to look good but it can be done. > > > >Let me know if I can help. > > > >Aaron Sargent > >The Linen Barn > >linen@xxxxxxxxxxx > >Medford, Oregon > >----- Original Message ----- > >From: "wl solomonson" <wlsolomonson@xxxxxxxxxxx> > >To: <Amayausers@xxxxxxxxxxxxxxxx> > >Sent: Saturday, March 06, 2004 1:10 PM > >Subject: [amayausers] Frustrated!!!!!! > > > > > > > I reallllllllllllllly hate embroidery today!!!! I don't know if I am > >just > > > too picky or if the logo I'm trying to sew has problems. I've had this > > > design professionally digitized by someone I know is a good digitizer > >but > >I > > > can't get it to sew out to my satisfaction. The lettering in the logo is > > > very thin, about 1/4" high and of course has serifs. All nasty issues > >for > > > the digitizer. The first file I received I couldn't make it through the > > > lettering without numerouse threadbreaks. I tried everything I could > >think > > > of except checking the hook timing. I finally sent it back to her to > >look > >at > > > again and she "fattened" up the letters a little bit. I've got it back > >and > > > can get through it without a thread break but I'm just not satisfied > >with > > > the way it looks. I've been sewing it out on a practice denim shirt, > >65/9 > > > sharp needle and I've got to use a layer of light cutaway and one of > >light > > > tearaway to get it hooped tight enough, tried running it at a 4 and then > >a > >5 > > > material thickness. Does anyone has some suggestions for me? My > >digitizer > > > does classes at all the shows so she is off traveling right now so can't > > > have her take a look at it again until she gets back. Would someone be > > > willing to run the design on their Amaya to see what they think? I've > >got > >an > > > order of shirts to do for this client and I'm starting to panic! > > > TIA > > > Wendy > > > Itchin' To Stitch > > > MN > > > > > > _________________________________________________________________ > > > Fast. Reliable. Get MSN 9 Dial-up - 3 months for the price of 1! > > > (Limited-time Offer) > >http://click.atdmt.com/AVE/go/onm00200361ave/direct/01/ > > > > > > > > > --------------------------------------------------------------------- > > > To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx > > > For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx > > > > > > > > > > > > > >--------------------------------------------------------------------- > >To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx > >For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx > > > > _________________________________________________________________ > Fast. Reliable. Get MSN 9 Dial-up - 3 months for the price of 1! > (Limited-time Offer) http://click.atdmt.com/AVE/go/onm00200361ave/direct/01/ > > ---------------------------------------------------------------------------- ---- > --------------------------------------------------------------------- > To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx > For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx --------------------------------------------------------------------- To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx