We have had the same problem. It doesn't happen all the time. David David Lindsey Hamlet, NC Vector Shirts 910-582-0051 ----- Original Message ----- From: "Linen Barn" <linen@xxxxxxxxxxx> To: <amayausers@xxxxxxxxxxxxx> Sent: Tuesday, November 23, 2004 5:57 PM Subject: [amayausers] Re: Color Sequence Errors I find that sometimes if I have for example a 8 color design with the 8th color being text and I sew the first few with no problems, then when its time to change text colors if I go into color sequence and just delete the last color and put in the new one most of the time it will not change the color. I have to clear all colors and then set them all up again in order to prevent sewing the wrong test. Not sure if this is a clitch or if it is supposed to be like this. Maybe Jeff will have an answer on this for us. Aaron Sargent The Linen Barn linen@xxxxxxxxxxx Medford, Oregon ----- Original Message ----- From: "Moore Embroidery & Designs" <moore-embroidery@xxxxxxxxxx> To: "Amayausers@Mailinglists. Org" <amayausers@xxxxxxxxxxxxx> Sent: Tuesday, November 23, 2004 11:28 AM Subject: [amayausers] Color Sequence Errors > I am watching my Amaya sew out with thread #16 in the first sew position > while looking at the OS Software and it should be on #1. I have seen this > off and on quite a bit recently and was wondering if anyone was having the > same problem? We are on the latest versions of both Design Shop and OS. > I picked my colors, checked them twice, hit the apply button and pressed the > start button. It is not consistent but, very frustrating to always have to > baby-sit this. > > > Thanks! > LiVawne G. Moore > > Moore Embroidery & Designs > 1724 Jerusalem Drive > Round Rock, TX 78664 > Office: 512.989.0518 > Cell Phone: 512.415.6185 > > Creative Custom Embroidery > Without Minimums > > > > -- Binary/unsupported file stripped by Ecartis -- > -- Type: application/ms-tnef > -- File: winmail.dat > > > >