How did yours turn out. Does it look good? Also what is the letter width (100% ?) Best Regards, Veena Viswanath Iris Embroidery www.IrisEmbroidery.com (510)-226-6171 -----Original Message----- From: amayausers-bounce@xxxxxxxxxxxxx [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Bob Purvis Sent: Wednesday, June 21, 2006 7:02 PM To: amayausers@xxxxxxxxxxxxx Subject: [amayausers] Re: 0.18" lettering help. Hi Veena, I'm currently in the process of doing some .18 lettering: DS Settings: - All capitals - Melco Block CP - 5.4 Density - 140% Comp - Centerwalk 12 pt - One or two 3.0 oz cut away - One solvey topping - 75/11 with 40 wt Isacord - TI/TO "only when neccessary" - TO set to 2pt. AOS Settings (for pique): - MT=6 -Column Feed=61 -Fill Feed=110 -Speed=700-900 If I have the thread colour in 60wt, I use it with a 65/9 and decrease the density to around 3.5-4.0. It looks better. In this case I don't :-( . Hope it helps.. Bob Purvis Island Embroidery Veena Viswanath wrote: >Hello All, > >I am working on 0.18" lettering for a design. Does some body have time to >look at it and give me some pointers as to how to make it better. It seems >to sink into the garment? > >Thanks so much, > >Best Regards, >Veena Viswanath > > >Iris Embroidery >www.IrisEmbroidery.com >(510)-226-6171 > > > >=========================================================== > >The AmayaUsers Mailing List >Website: http://www.amayausers.com >Discussion Board: http://www.amayausers.com/boards >Subscribe/Unsubscribe: http://www.amayausers.com/list > >=========================================================== > > > > =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list =========================================================== =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================