which area do you live in martin? i in the west midlands. if it is my aerial i would be surprised as even the portset box ran perfect how can i ring the RNIB technical support team please to help the issue get resolved? On 17 May 2012, at 07:49, dudleym@xxxxxxxxxxxx wrote: > Yes I have the same problem. Signal went down to 25%. I re-tuned as couldn't > get any output at all. The last time I checked the signal was 47%. When I get > chance I'm going to swap it over and see what the Goodmans is reporting. I > have reported this to the RNIB technical team. > > Martin. > > william lomas recently said:- > >> hi all, my freeview receiver is mounted on the wall outside the block >> of flats where i live and its signal is terrible with this new RNIB freeview >> box, i keep losing signal, anyone else had this? >> i assume whether i use scart or HDMI shouldn't make a difference? >> only noticed this recently when I check the service status only getting 38 >> to 40 percent signal on channels, strange as the west midlands area have >> changed over fully to freeview. >> with the portset freeview and the goodmans, had no problemw with the >> freeview. my cables are all connected firmly fromw what i can tell >> >> ** To leave the list, click on the immediately-following link:- >> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >> ** If this link doesn't work then send a message to: >> ** access-uk-request@xxxxxxxxxxxxx >> ** and in the Subject line type >> ** unsubscribe >> ** For other list commands such as vacation mode, click on the >> ** immediately-following link:- >> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >> ** or send a message, to >> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > > ** To leave the list, click on the immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** access-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq