[access-uk] Re: signal very poor iwth new freeview

  • From: "Sandra Heaton" <sandra@xxxxxxxxxxxxxxxxxxx>
  • To: <access-uk@xxxxxxxxxxxxx>
  • Date: Thu, 17 May 2012 10:17:58 +0100


Hi William,

I know where you are coming from even though I haven't had the same thing as you but I think that in some areas the signal is not strong enough. Have you thought about getting a signal booster? they are not very expensive you can get one for £7.00 which you should be able to buy from any aerial shack or most likely off eBay. I might have to get one for myself.

Also have you wrote to tvonics I have, they should actually be able to advise you as well. Unfortunately there is no contact number for tvonics but they do have email.


I hope this helps.


Sandra
Braille Greeting Cards
www.braille-greetings-cards.co.uk

----- Original Message ----- From: "william lomas" <will.d.lomas@xxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Thursday, May 17, 2012 6:38 AM
Subject: [access-uk] signal very poor iwth new freeview


hi all, my freeview receiver is mounted on the wall outside the block of flats where i live and its signal is terrible with this new RNIB freeview box, i keep losing signal, anyone else had this?
i assume whether i use scart or HDMI shouldn't  make a difference?
only noticed this recently when I check the service status only getting 38 to 40 percent signal on channels, strange as the west midlands area have changed over fully to freeview. with the portset freeview and the goodmans, had no problemw with the freeview. my cables are all connected firmly fromw what i can tell

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: