[access-uk] Re: The Braille Index a Question
- From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Wed, 3 Dec 2008 17:23:15 -0000
Try 1-9999. You'll get a warning that there are not as many pages, so
just accept.
George.
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On
Behalf Of Tony Sweeney
Sent: 03 December 2008 15:42
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: The Braille Index a Question
Hi Jackie,
You see the problem is that I don't know as of now what number the
last
(Braille) page is going to be.
I will be brailling from page 5 onwards to finish!
I imagine I type in say 4- but what would follow the dash or could I
type in
say for argument's sake '"all"?
Thanks to date
Tony
----- Original Message -----
From: "Jackie Cairns" <jackie.cairns@xxxxxxxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Wednesday, December 03, 2008 4:26 PM
Subject: [access-uk] Re: The Braille Index a Question
> Hi Tony
>
> When you go to emboss with control E, instead of entering on the
command
> to do so, tab to the combo box where you will be able to choose from
> several page range options. Arrow down to Page Range Braille Page
> Number(s). Now tab again and put in the first page you want to
start
> embossing from, followed by a dash, then the last page you want to
> Braille. For example 4-80. Then tab to OK, and this should work.
>
> Jackie Cairns
> Braille Support Adviser
> Email: Jackie.Cairns@xxxxxxxxxxxxxxxxxxx
> Sight and Sound Technology
> Welton House North Wing
> Summerhouse Road
> Moulton Park
> Northampton
> NN3 6WD
> Telephone: 01604 798024
> Fax: 01604 798090
> Web: www.sightandsound.co.uk
>
> -----Original Message-----
> From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On
Behalf
> Of Tony Sweeney
> Sent: 03 December 2008 15:14
> To: access-uk@xxxxxxxxxxxxx
> Subject: [access-uk] Re: The Braille Index a Question
>
> Jackie
>
> It is Duxbury.
> ----- Original Message -----
> From: "Jackie Cairns" <jackie.cairns@xxxxxxxxxxxxxxxxxxx>
> To: <access-uk@xxxxxxxxxxxxx>
> Sent: Wednesday, December 03, 2008 3:51 PM
> Subject: [access-uk] Re: The Braille Index a Question
>
>
> > Hi Tony
> >
> > What Braille translation software are you using?
> >
> >
> > Jackie Cairns
> > Braille Support Adviser
> > Email: Jackie.Cairns@xxxxxxxxxxxxxxxxxxx
> > Sight and Sound Technology
> > Welton House North Wing
> > Summerhouse Road
> > Moulton Park
> > Northampton
> > NN3 6WD
> > Telephone: 01604 798024
> > Fax: 01604 798090
> > Web: www.sightandsound.co.uk
> >
> > -----Original Message-----
> > From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On
> Behalf
> > Of Tony Sweeney
> > Sent: 03 December 2008 14:23
> > To: accessc-uk
> > Subject: [access-uk] The Braille Index a Question
> >
> > Hi all,
> >
> > This may be a question for George but it would be good also to
hear
> from
> > any of you on this.
> >
> > I have recently acquired The Braille Index and have a question
which I
> > trust isn't too techy!
> >
> > I did a test of two braille pages, which went well thankfully but
then
> I
> > did another two (pages 3 & 4 ) being the braille ones which I
typed
> in
> > in the appropriate box (3-4) to achieve that task.
> >
> > So far so good!
> >
> > Now I wish to continue brailling (embossing) the complete manual!
> >
> > I typed in 3-4 for those pages to be brailled, now how can I
continue
> to
> > braille the rest of the manual in question without having to go
back
> to
> > scratch?
> >
> > The paper isn't cheap so I don't want to necessarily go brailling
out
> > those earlier pages again.
> >
> > So I need to braille out only now the braille pages from 5 to
finish.
> >
> > any help much appreciated.
> >
> > Tony
> >
> > ** To leave the list, click on the immediately-following link:-
> > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > ** If this link doesn't work then send a message to:
> > ** access-uk-request@xxxxxxxxxxxxx
> > ** and in the Subject line type
> > ** unsubscribe
> > ** For other list commands such as vacation mode, click on the
> > ** immediately-following link:-
> > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> > ** or send a message, to
> > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
> >
> >
> >
______________________________________________________________________
> > This email has been scanned by the MessageLabs Email Security
System.
> > For more information please visit http://www.messagelabs.com/email
> >
______________________________________________________________________
> > ** To leave the list, click on the immediately-following link:-
> > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > ** If this link doesn't work then send a message to:
> > ** access-uk-request@xxxxxxxxxxxxx
> > ** and in the Subject line type
> > ** unsubscribe
> > ** For other list commands such as vacation mode, click on the
> > ** immediately-following link:-
> > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> > ** or send a message, to
> > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
> >
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
>
______________________________________________________________________
> This email has been scanned by the MessageLabs Email Security
System.
> For more information please visit http://www.messagelabs.com/email
>
______________________________________________________________________
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
