[access-uk] Re: Number entry on the N95 8GB
- From: "Steve Nutt" <steve@xxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Sun, 23 Nov 2008 22:54:29 -0000
Hi Eleanor,
Yes, the N95 still has an edit key. The N82, E51, E71, E66, etc, don't.
All the best
Steve
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Eleanor Burke
Sent: Sunday 23 November 2008 19:06
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: Number entry on the N95 8GB
Ok Steve, half my Talks key is an Edit key and we are talking N95 8GB and
the N95 I purchased from you.
Eleanor
----- Original Message -----
From: "Steve Nutt" <steve@xxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Sunday, November 23, 2008 6:55 PM
Subject: [access-uk] Re: Number entry on the N95 8GB
> Hi Chris,
>
> It is not the Talks key on most phones any more, since the newer 3rd
> edition
> phones don't tend to have an edit key. In this case, it is the menu key
> that is the Talks key.
>
> All the best
>
> Steve
>
> -----Original Message-----
> From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf
> Of
> Chris Hallsworth
> Sent: Sunday 23 November 2008 15:33
> To: access-uk@xxxxxxxxxxxxx
> Subject: [access-uk] Re: Number entry on the N95 8GB
>
> The edit key is the Talks key on most phones. However, if you press it
> twice, it will open a special menu, only available in certain text fields,
> where you can manage your predictive text settings, switch to alpha/number
> mode, change the writing language, and, if a selection exists, cut or copy
> the selection onto the clipboard. If the clipboard contains text or
> numbers,
> a paste option will also be visible. So, as you can see, there's some
> flexibility when using the edit key. The edit key is also used for text
> selection. To do this, at the second press hold it down, use your arrow
> keys
> to select the text, press soft key 1 to copy it to the clipboard. To cut
> it,
> let go of the edit key, press it again twice, this time not holding it on
> the second press, then select cut from the menu. To paste your selection,
> press the edit key twice, again not holding it at the second press, and
> select paste from the menu. Hope this all helps.
>
> --
> Chris Hallsworth
> e-mail: christopherhallsworth71@xxxxxxxxxxxxxx
> MSN: ch9675@xxxxxxxxxxx
> skype: chrishallsworth7266
> klango: chrishallsworth
> ----- Original Message -----
> From: "Saqib" <saqib500@xxxxxxxxxxxxxx>
> To: <access-uk@xxxxxxxxxxxxx>
> Sent: Sunday, November 23, 2008 12:48 PM
> Subject: [access-uk] Re: Number entry on the N95 8GB
>
>
> Hi Eleanor. I've got it working now thanks to your and Chris's advice.
> Both
> methods work. Can you tell me what else the edit key can do?
> ----- Original Message -----
> From: Eleanor Burke
> To: access-uk@xxxxxxxxxxxxx
> Sent: Saturday, November 22, 2008 9:37 PM
> Subject: [access-uk] Re: Number entry on the N95 8GB
>
>
> Mine works fine with the latest firmware
>
> Eleanor
> ----- Original Message -----
> From: Saqib
> To: access-uk@xxxxxxxxxxxxx
> Sent: Saturday, November 22, 2008 9:12 PM
> Subject: [access-uk] Number entry on the N95 8GB
>
>
> Hi I have the latest firmware on my N95 8GB. When I'm filling in a form
> or writing a text message there doesn't seem to be an option to enter
> numbers directly. This option is usually under the hash key and there are
> multiple of other options such as predictive text or standard lower case
> or
> all capitals. Normally the number entry option would be found here but
> there
> doesn't appear to be such an option on my phone. Is this a firmware bug or
> has the number entry option been assigned to another key command.
>
>
>
----------------------------------------------------------------------------
> --
> I am using the Free version of SPAMfighter
> We are a community of 5.6 million users fighting spam.
> SPAMfighter has removed 766 of my spam emails to date.
> The Professional version does not have this message
>
>
>
>
----------------------------------------------------------------------------
> --
>
>
>
> No virus found in this incoming message.
> Checked by AVG - http://www.avg.com
> Version: 8.0.175 / Virus Database: 270.9.9/1805 - Release Date:
> 22/11/2008
> 10:34
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
--
I am using the free version of SPAMfighter.
We are a community of 5.6 million users fighting spam.
SPAMfighter has removed 781 of my spam emails to date.
Get the free SPAMfighter here: http://www.spamfighter.com/len
The Professional version does not have this message
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
