Hello!
I've excluded main output at all - to minimize cpu usage for
additional mixing and processing. Separate outputs are mainly useful for
routing yoshimi channels to external mixing software (such as ardour)
where any configuration of effects can be used. I think, if you need
system effects you can use ordinal version with one stereo output. But
in multi optput version you can route all channels to one ardour bus and
apply any number of effects to it - so this will be analog for system
effects in yoshimi.
04.04.2013 18:13, Will J Godfrey пишет:
On Thu, 04 Apr 2013 17:22:50 +0000
Дерябин Андрей <andrewderyabin@xxxxxxxxx> wrote:
Hello all!Is it possible to leave the system effects in place still going to the 'main'
I' ve started using yoshimi several days ago (thanks to authors -
it's performance is excellent!) with ardour-3. All was ok (midi channel
mapping, jack session support), until I decided to make different
effects on every instrument. It was not possible due to only one stereo
output, that simply mixes all 16 channels. So I've modified yoshimi code
and made a patch to make every channel appear as separate stereo output
in jack. Now it works almost exellent for me - I can route every channel
to dedicated ardour bus!
If it is possible to include my modifications in main code (if
somebody else needs it :) ), I can send a patch!
P.S. I had to disable system efx because of it stereo-only nature. Ather
effects (channel inserts, etc) works ok!
PPS Sorry for my english :-)
output pair?
That would maintain compatibility and also give some interesting side-chain
possibilities.
