Hi All, Server: W2K (SP2) Adv Server running Terminal Services Client: Windows NT 4.0 (SP6/a) Printer: HP 5000 LaserJet PCL 6 (Networked) We are currently experiencing a problem with our Terminal Server and HP 5000 LaserJet Series printer. The problem we're experiencing is that we cannot get access, through a Terminal Services session, to the additional trays on the printer. Everything looks fine at the client side. The client PC can print to any tray requested over the network. However when the client PC is connected through Terminal Services, the additional trays are not listed. Can anyone please help? TIA, Rab. ========================================================= Robert Jackson Phone: +44 (0) 141 332 7999 Software Engineer Fax: +44 (0) 141 331 2820 Walker Martyn Ltd 1 Park Circus Place Email: rab@xxxxxxxxxxxxxxxxxx Glasgow G3 6AH, Scotland Web: http://www.walkermartyn.co.uk ========================================================= ************************************************************************ The information in this internet E-mail is confidential and is intended solely for the addressee. Access, copying or re-use of information in it by anyone else is unauthorised. Any views or opinions presented are solely those of the author and do not necessarily represent those of Walker Martyn Ltd or any of its affiliates. If you are not the intended recipient please contact administrator@xxxxxxxxxxxxxxxxxx **************************************************************** ================================== To Unsubscribe, set digest or vacation mode or view archives use the below link. http://thethin.net/win2000list.cfm