Here's the quick and dirty way that can be unfriendly for NT clients. C:\>net send username "" The message was successfully sent... C:\>nbtstat -c Name Type Host Address Life [sec] ---------------------------------------------------- USERNAME <03> UNIQUE 192.168.1.100 520 (NOTE IP ADDRESS) C:\>nbtstat -A 192.168.1.100 Name Type Status --------------------------------------------- COMPUTER10 <00> UNIQUE Registered It's a three step process. Net send "" to the user. If the use is running Windows 2000 or higher, he will see nothing. NT users will see a blank net send. The messenger service will locate the username by finding the computer with an <03> registration with that username. That resolution will be stored in your local netbios cache. Look at that cache with the nbtstat -c command. That will show you the correlation between the username and the IP address. And then you can look at that machine's netbios table with nbtstat -A [ip] and get its computer name <00>. Ray at work > -----Original Message----- > From: windows2000-bounce@xxxxxxxxxxxxx > [mailto:windows2000-bounce@xxxxxxxxxxxxx] On Behalf Of Sorin Srbu > > Hi all, > > Is there a FAST way to locate where a user is logged on? > Preferrably easy too. 8-) > > I've tried sysinternals psloggedon, but this one is s-l-o-w, as it > scans the entire domain... > ******************************************************** This Weeks Sponsor StressedPuppy.com Games Feeling stressed out? Check out our games to relieve your stress. http://www.StressedPuppy.com ******************************************************** To Unsubscribe, set digest or vacation mode or view archives use the below link. http://thethin.net/win2000list.cfm