Object effectsSorry JP, not done it, so can’t advise. Steve.
Follow me on Twitter:
@stevesax123
From: Jean-Philippe Rykiel
Sent: Wednesday, February 22, 2017 11:20 AM
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: Samplitude objects aux sends
yes Steve. I understand.
Meanwhile, I'm trying to find my way with the Jaws cursor. Any advice you can
give me?
Best,
JPR
http://www.jprykiel.com
http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel
Le 22/02/2017 à 12:18, Steve Spamer a écrit :
I’m aware there is a bit of work to do in the OE, but I’ll get to it when I
can. Getting this latest build out has been a very big undertaking...and this
isn’t a job . Steve.
Follow me on Twitter:
@stevesax123
From: Jean-Philippe Rykiel
Sent: Wednesday, February 22, 2017 9:28 AM
To: viplist
Subject: [vipaudioaccess] Samplitude objects aux sends
hi there,
you can insert effects on objects in Samplitude, it's easy enough thanks to
Steve. Now, here is a little paragraph in Samplitude's manual that interests me.
quote :
Gain and AUX sends
Gain: Set the gain for the object here.
AUX Sends: Any object can send to all available AUX busses. You will see,
however, initially only to AUX1 AUX 4. You can adjust the corresponding slider
by dragging in the respective AUX Send field.
By right click on the blue button in the header the advanced AUX send dialog
will open, which provides full access to all AUX send paths.
By left clicking on the blue button in the track header you can bypass all
AUX sends (Bypass function).
end of quote.
I can see the gain in the object editor's effects tab but not the Aux sands.
Can you fix this Steve?
Best,
JPR
--
http://www.jprykiel.com
http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel