Yes.. I mostly use it on the c64/tape port.. I haven't used it on my sx a
couple of years.
this email was composed and sent from my smartphone. please excuse any errors
Ben Kayfetz
416-831-6339
________________________________
From: torontocbm-bounce@xxxxxxxxxxxxx <torontocbm-bounce@xxxxxxxxxxxxx> on
behalf of Chiron Bramberger <dmarc-noreply@xxxxxxxxxxxxx>
Sent: Wednesday, December 1, 2021 10:08:10 PM
To: torontocbm@xxxxxxxxxxxxx <torontocbm@xxxxxxxxxxxxx>
Subject: [torontocbm] Re: SD2IEC Power
And it’s been working just fine getting power from the user port?
Sent from my iPhone
On Dec 1, 2021, at 7:56 PM, Ben Kayfetz <benkayfetz@xxxxxxxxxxx> wrote:
Here's a photo showing how I adapted mine for the SX..
this email was composed and sent from my smartphone. please excuse any errors
Ben Kayfetz
416-831-6339
________________________________
From: torontocbm-bounce@xxxxxxxxxxxxx <torontocbm-bounce@xxxxxxxxxxxxx> on
behalf of Chiron Bramberger <dmarc-noreply@xxxxxxxxxxxxx>
Sent: Wednesday, December 1, 2021 5:30:03 PM
To: TPUG Mailing List <torontocbm@xxxxxxxxxxxxx>
Subject: [torontocbm] SD2IEC Power
I’ve measured my SD2IEC as pulling in like roughly 0.01 amps or 10 mA.
Can I power it from the joystick port or user port on an SX-64?
Sent from my iPhone
<20211201_195009.jpg>
