Im going on a limb to say - if the romulator replaced the ram with known
good ram, and it works.. you have a problem with bad ram, or a control chip
that controls the ram
eitherway, leaving the romulator in will fix it :)
On Thu, Apr 21, 2022 at 11:29 AM ZsimonZ <
dmarc-noreply-outsider@xxxxxxxxxxxxx> wrote:
Good morning all,
Wondering if someone knows of this issue I am having with
my PET 2001-8.
So when it is turned on everything boots up fine with correct RAM
I load a game from either Cassette 1 or 2 and the program does not load
all the code , missing a few lines of code
I install romulator which replaces the memory on the board and I perform
the same loads I did above and all the code is loaded and game works fine.
Does anyone know what the issue might be?
Thanks
Simon
