Time to change over to something like GMail there Ernie....wont have
to feel obligated to keep Bell over better services now out there too!
:p
Jeff
On 12/26/21, Ernie Chorny <chorny@xxxxxxxx> wrote:
HI All
This email from Marlon Schmitt was sent on 24 Dec 2021 at 9:09 AM. I
received it on 26 Dec 2021 at 7:05 PM.
Why does thus happen?
Ernie
-------- Forwarded Message --------
Subject: [torontocbm] Having trouble with Foenix 256 U+
Date: Fri, 24 Dec 2021 14:09:14 +0000
From: marlon schmitt <marlon.schmitt88@xxxxxxxxxxx>
Reply-To: torontocbm@xxxxxxxxxxxxx
To: torontocbm-bounce@xxxxxxxxxxxxx <torontocbm-bounce@xxxxxxxxxxxxx>,
torontocbm@xxxxxxxxxxxxx <torontocbm@xxxxxxxxxxxxx>
Hello. I can't get my U+ to work. I just bought a new monitor cable and
plugged it in, so my monitor has power, and I firmly connected the DVI-D
cable to my monitor and the EVID-200 unit attached to my U+, but I get a
No Device Attached error, which I didn't get before. I also connected an
RJ45 50' cable from my U+ to my router/modem in port 4, but port 4 won't
light up like port 2 does, which is attached to my Windows 10 computer.
I have a power cable attached to my U+, and when I turn the U+ on, all
the lights turn on for an instant, then turn off, so I know the U+ and
EVID-200 both work. What should I do? - Marlon S.
