[torontocbm] Finished my Hummer DTV Mod...
- From: "Miraglia, Walter" <Walter.Miraglia@xxxxxxxxxxx>
- To: "torontocbm@xxxxxxxxxxxxx" <torontocbm@xxxxxxxxxxxxx>
- Date: Sun, 21 Jun 2009 22:15:39 -0500
I have the User port (all 8 lines + Gnd) brought to the 9 Pin male.
(not standard configuration, but I won't be using it with a joystick)
So far it's just Composite going out.
I have not done the Spiff DTV mod yet, but that is the one I will do...
I have the SD2IEC enclosed with an activity/error light on a bi colored led.
Have a look :)
http://www.postimage.org/image.php?v=gxBMGGr
here is the front/side of the unit with Power Adapter
(5 Volts to power keyboard and SD2IEC)
Composite Video Connector ( may do the svideo hack later if I find the need )
Audio connector.
Keyboard Connector.
Power LED
Activity/Error LED for SD2IEC board
The Slot for the SD card.
http://www.postimage.org/image.php?v=Pq1lonMi
The rear of the unit is the On Off switch.
The reset button.
And a Custom PB0-7 9 pin port with Gnd.
http://www.postimage.org/image.php?v=Pq1lq51r
Other related posts:
