[torontocbm] Re: Another 1581 question
- From: joseph palumbo <jppbm@xxxxxxxxxx>
- To: torontocbm@xxxxxxxxxxxxx
- Date: Sun, 6 Jul 2008 18:00:14 -0400 (EDT)
This is strange considering the top case just sits there.... Are you sure
cable isn't loose or being pinched by the top cover or even in way of the
closing screw?
I'd say to bring it to a tpug meting but thats a wayz off now with summer.
Anyone else on the list here,have a drive mech that was scared of the dark?
Joseph Palumbo
JP PBM Products By Mail
www.jppbm.com
james.m.alexander@xxxxxxxxx wrote: Hi Joe,
After a frustrating time I picked up the 1581 again today and managed to get it
nearly working except for one oddity,
when I close the case (ie top cover) and tighten the rear screw the drive will
read but not write, even when I format a
disk it barfs out a ?bad disk error. It works with the top cover off but I
really don't wanna leave it that way. Any
ideas?
> James - Check for an RY or RDY Jumper as well...
>
> Attached are the instructions....
>
> Joseph Palumbo
> JP PBM Products By Mail
> www.jppbm.com
>
> james.m.alexander@xxxxxxxxx wrote: Hi all,
>
> I picked up some drive mech's from golan last night and been trying them out
> today in my 1581. Theres one detail that
> I've missed. That is when I try to load directory on the disk the drive
> spins and the computer (a Rev.A 64) freezes.
> I remembered to set the drives I tried to DS0. I even tried formatting a
> disk, appeared to work but can't tell for
> sure as can't read the directory of course.
>
> thanks
> James
>
>
>
>
>
> [Attachment: 1581 kit flyer.jpg]
> [Attachment: 1581 kit Full Instructions.jpg]
Other related posts:
