[tmp] Re: Mini-jack TX Bluetooth Transmitter Manual
- From: Claire Mesa <roselady4@xxxxxxxxx>
- To: tmp <tmp@xxxxxxxxxxxxx>
- Date: Tue, 7 Jan 2014 19:35:06 -0500
It's an actual Bluetooth transmitter that adds wireless capability to your
audio devices like the Sansa Mp3 Players and we also have receivers that
can enable your existing stereo system, car stereo, speakers etc...to
receive Bluetooth signals from your smart phone, laptop, your talking mp3
player if it has the transmitter attached. There is no need to tune into
certain stations etc... You can read about them here:
http://www.talkingmp3players.com/accessories.html
I think there are such things as you are talking about and I think we've
had one in the past. The ones I've seen don't work very well and these
Bluetooth devices being referred to work much better for the purpose.
Best,
Claire
On Tue, Jan 7, 2014 at 7:19 PM, Gerardo Corripio <gera1027@xxxxxxxxx> wrote:
> HI laz and listers
> Is the device being talked about those that you have to on the stereo, put
> on a certain radio frequency, and then the device transmits the music to
> the stereo? Makes sense? Is there such a device if that's the one not being
> talked about?
>
> El 07/01/2014 04:03 p.m., Laz escribió:
>
> Hello all,
>>
>> Here's the manual for the Mini-jack TX Bluetooth Transmitter. It
>> should answer some of the questions you may have.
>>
>> Mini-jack TX Bluetooth® Wireless Music Transmitter User Manual
>>
>> Introduction
>>
>> The Miccus® Mini-jack TX is a stereo audio transmitter that offers the
>> latest in Bluetooth® wireless technology.
>>
>> -The mini-jack provides wireless streaming for any existing audio
>> source. such as your PC, iPod®, TV, CD/DVD player etc. Stream your
>> music to other Bluetooth enabled devices such as headphones, speakers
>> or the Home RTX and Mini-jack RX.
>>
>> - Compatible with stereo headphone and line outputs (3.5mm).
>> - Simple and easy pairing, no codes to enter.
>>
>> Technical Data:
>>
>> • Bluetooth v2.0, Class 2: 33' (10 m)
>> • Bluetooth stereo audio profile: A2DP
>> • Frequency: 2.4 GHz
>> • 1/8" (3.5 mm) stereo connector
>> • Sleep mode for saving energy
>> • Operation time: up to 7 hours
>>
>> Contents of Package
>>
>> Miccus® Mini-jack TX
>> USB Charging Cable
>> User Manual
>>
>> If contents are missing or damaged, contact the merchant or contact us
>> at support@xxxxxxxxxx
>>
>> Getting Acquainted
>>
>> Charging
>>
>> 1. Using the supplied USB cable, connect the small end to the mini-USB
>> input of the mini-jack.
>>
>> 2. Connect the other end of the cable to the to the USB input on your
>> PC, laptop or USB power supply.
>>
>> 3. When charging is complete the red LED light will automatically turn
>> off. A full charge should Allow for 7 hours of playback time.
>>
>> Turning the mini-jack On/Off
>>
>> Turning on: Press and hold the On/Off button for 3 seconds until the
>> blue LED begins flashing.
>>
>> Turning off: Press and hold the on/off button for about 5 seconds; the
>> red LED will flash once and the mini-jack will power off.
>>
>> Note: Read the user guide of your music player or mobile phone to find
>> out how to turn it On/Off.
>>
>> Pairing the mini-jack
>>
>> "Pairing" is establishing a wireless connection between the Miccus®
>> Mini-jack TX transmitter and any compatible receiver.
>>
>> In order for music streaming to begin, the Miccus® Mini-jack TX must
>> pair itself with a receiver featuring Bluetooth wireless technology.
>>
>> Note: Before pairing, make sure that both the Miccus® Mini-jack TX and
>> the receiving device are fully charged.
>>
>> The Pairing Process
>>
>> For initial pairing, we recommend both devices be within 4ft. (1m) of
>> each other.
>>
>> 1. Turn the receiver on and make sure it is in pairing mode. (Please
>> refer to your receiver's user guide).
>>
>> 2. For the Mini-jack TX, press and hold the button for 8 seconds or
>> until the red and blue LED are flashing indicating pairing mode. Now
>> set them next to each other and within 10 - 30 seconds they should
>> pair with each other.
>>
>> 3. When the mini-jack is paired to your receiver, the indicator light
>> will flash only blue.
>>
>> After pairing your Miccus® Mini-jack TX and receiver, it will not be
>> necessary to repeat each time they are used together. For all future
>> uses, both devices should automatically connect when powered on.
>> However with some receivers it maybe necessary to press the Mini-jack
>> TX button briefly which initiates a start playback command to the
>> receiving device.
>>
>> Note: The Miccus® Mini-jack TX only pairs with receivers that have a
>> factory PIN-Code equal to "0000", "1234" or "8888".
>>
>> The Mini-jack TX can only be paired to one device at a time.
>>
>> If you wish to use the Miccus® Mini-jack TX with another receiver, you
>> must restart the pairing process with the new device.
>>
>> Playing Music
>>
>> 1. Insert the Miccus® Mini-jack TX into the headphone jack of the
>> source device (e.g.: MP3 player, CD player, cell phone, stereo, etc.).
>> Make sure the volume is turned up on your source device.
>>
>> 2. Verify that the receiver is turned on and within 33' (10m) of the
>> Miccus® Mini-jack TX.
>> 3. During transmission the Blue LED light will flash slowly,
>> indicating connection.
>>
>> 4. Volume and playback can be controlled from your audio source just
>> as if it was a hard wired connection.
>>
>> Visual Indicators
>>
>> Pairing or establishing a connection: The red and blue LED flash
>> alternately
>> Connected and playing: The blue LED flashes once every 3 seconds
>> Sleep mode: The blue LED flashes once every 5 seconds
>> Charging: Solid red
>> Charging and connected: Solid red with slow flashing blue
>>
>> Troubleshooting
>>
>> The connection between the mini-jack and receiver is established once
>> the pairing process is complete. The connection can break for the
>> following reasons:
>>
>> a. The distance between the devices is greater than 33' (10
>> m), or
>> there are obstacles (e.g.: walls, furniture, etc.) between them.
>>
>> b. One or both of the devices have been turned off or must be recharged.
>>
>> c. Connection has not been made within a specific time and the device
>> is in sleep mode or powered off. Turn on/off both devices to
>> re-establish connection.
>>
>> If for any reason the Miccus® Mini-jack TX does not re-connect or
>> transmit audio please try the following:
>>
>> a. Power cycle (on/off) the mini-jack and receiver.
>> b. Power cycle and repeat pairing process for both devices.
>> c. Recharge both devices.
>> d. Make sure you are trying to pair the Mini-jack TX with an A2DP
>> compatible receiving device.
>>
>> Note: Mobile phones, Tablets, PCs are also transmitters and will not
>> pair with the Mini-jack TX.
>>
>> Support
>>
>> Further details and answers to common questions are found at
>> www.miccus.com/support.
>>
>> If your question is not answered, feel free to email us at
>> support@xxxxxxxxxx. Please include the product name in your email
>> subject line.
>>
>> For live technical assistance please call 1(616) 604-4449.
>> Our hours of operation are Monday thru Friday, 11am-4pm CST.
>>
>> Best of 2014!
>>
>> Laz
>>
>>
> --
> Enviado desde mi lap
> Gerardo J Corripio Flores Psicólogo, Terapéuta Reiki
> Saludos desde Tampico, Tamaulipas México
> RompiendoBarreras espacio de psicología/Superación Personal Sábados 10PM
> México http://radiogeneral.com ¡los esperamos!
>
>
>
--
Earn Money Fast! <http://www.earnmoneyfast.biz/>
Click link to find out how!
Unlimited Quality 4G Cell Service only $49 per
month<http://www.solavei.com/roselady>
Works with the new Google Galaxy Nexus!
Other related posts:
