that HP universal driver is crap. I've had mojor challenges finding 64 bit print drivers too. it's getting better though. On Wed, Dec 10, 2008 at 3:51 PM, M <mathras@xxxxxxxxxxxxxxxx> wrote: > You cant beat 64 bit servers running PS 4.5 we have around 60 of them for > our Core applications. > (apart from some of the seamless application differences with PS 4.5 > running on 32 bit - at the same patch levels). > > What printer vendors are you using ? > > We are using 64 bit and after some searching found around 95% of the > drivers had 64 bit versions. > We use Xerox , HP and Brother although are standardising on Xerox MFDs. > > Have you seen this article > > http://support.microsoft.com/kb/895612/ > > I did spend quite a bit of time hunting for drivers and even spoke to the > manufacturers. One of them said a couple of printers had no 64 bit printer > driver. The drivers did exist and turned up in Windows XP 64 bit downloads. > > If a 64 bit HP driver does not exist, they recommend an alternative driver > to use or the HP universal drivers instead. > Xerox have 64 bit drivers for almost all of their printers apart from some > of the older non supported models. > > > > ----- Original Message ----- > *From:* Anthony Green <agreen@xxxxxxx> > *To:* thin@xxxxxxxxxxxxx > *Sent:* Tuesday, December 09, 2008 9:36 PM > *Subject:* [THIN] Re: thinprint for 64bit Citrix to 32bit PrintServer > > These are a mishmash of network printers (session based assigned via > citrix policies) so can't use the UPD. > > > > *From:* thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] *On > Behalf Of *Joe Shonk > *Sent:* 09 December 2008 15:20 > *To:* thin@xxxxxxxxxxxxx > *Subject:* [THIN] Re: thinprint for 64bit Citrix to 32bit PrintServer > > > > Why not just use the UPD included with Citrix? For most organizations it > works great. Very, very few cases where a third-party solution is required. > > > > > > *From:* thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] *On > Behalf Of *Anthony Green > *Sent:* Tuesday, December 09, 2008 5:13 AM > *To:* thin@xxxxxxxxxxxxx > *Subject:* [THIN] thinprint for 64bit Citrix to 32bit PrintServer > > > > We are upgrading a Citrix farm to 64bit and was looking at this as a > possible solution to the print problems we would get with 64bit drivers (or > lack of them). > > > > We are not going to be using thinprint for client printing... just for > network printing. > > > > I've been told we need to buy .print engine for all CTX servers and the > .print client would be installed on the print server. > > > > Does this sound right? Anyone give me a rough idea of cost for this per > Citrix Server (approx 60) or per user? > > > > Thanks, > Ant. > >