[THIN] Re: Windows 2000 Terminal server in NT Domain -- UPDATE

  • From: Henry Sieff <hsieff@xxxxxxxxxxxx>
  • To: "'thin@xxxxxxxxxxxxx'" <thin@xxxxxxxxxxxxx>
  • Date: Tue, 8 Apr 2003 10:15:23 -0500

If you could only save one bit of knowledge about troubleshooting any
problem, this would be it.

> -----Original Message-----
> From: Nikolic, Aleks [mailto:ANikolic@xxxxxxxxxxxxxxxxxxx]
> Sent: Tuesday, April 08, 2003 8:39 AM
> To: 'thin@xxxxxxxxxxxxx'
> Subject: [THIN] Re: Windows 2000 Terminal server in NT Domain 
> -- UPDATE
> 
> 
> 
> Maybe a small tip...but stick to one solution at a time. If 
> you try both
> solutions, you won't know which solution helped you in the end!
> 
> Regards,
> 
> Aleks
> 
> 
> -----Oorspronkelijk bericht-----
> Van: Joseph Finley [mailto:jfinley@xxxxxxxxxxxxx]
> Verzonden: dinsdag 8 april 2003 15:21
> Aan: thin@xxxxxxxxxxxxx
> Onderwerp: [THIN] Re: Windows 2000 Terminal server in NT Domain --
> UPDATE
> 
> 
> 
> 
> I used the utility to push the servers to a known good BDC 
> (so I think) =
> and
> no problems yesterday was reported.  I didn't get a chance to 
> update the =
> NIC
> drivers.  Will try tonight.
> 
> 
> Joe
> 
> -----Original Message-----
> From: Joseph Finley [mailto:jfinley@xxxxxxxxxxxxx]=3D20
> Sent: Monday, April 07, 2003 8:59 AM
> To: thin@xxxxxxxxxxxxx
> Subject: [THIN] Re: Windows 2000 Terminal server in NT Domain
> 
> 
> 
> 
> I just checked and we are in fact running 6.1.03.0.  I will update and
> reboot tonight.  I will also check into the corrupt BDC someone =3D3D
> suggested.
> 
> Thanks.
> Joe
> 
> 
> -----Original Message-----
> From: thin-bounce@xxxxxxxxxxxxx 
> [mailto:thin-bounce@xxxxxxxxxxxxx] On =
> =3D =3D3D
> Behalf Of tobias.bjorkskog@xxxxxxxxxxxxxxxxx
> Sent: Monday, April 07, 2003 1:58 AM
> To: thin@xxxxxxxxxxxxx
> Subject: [THIN] Re: Windows 2000 Terminal server in NT Domain
> 
> 
> 
> 
> Hi!
> 
> We had the same problems after installing SP3.
> 
> We updated our NIC drivers for Intel(R) PRO/1000 F Server Adapter.
> 
> Our previous driver was version 6.1.03.0, and now we have 6.4.16.0
> installed.
> 
> I think that fixed the problem, because our server hasn't 
> hanged/crashed
> since we updated our drivers.
> 
> regards, Tobias
> 
> 
> 
> 
> 
> 
> =3D3D20
> 
>                     "Joseph Finley"
> 
>                     <jfinley@prcont        To:     
> <thin@xxxxxxxxxxxxx>
> 
>                     rol.com>               cc:
> 
>                     Sent by:               Subject:     
> [THIN] Windows =
> =3D
> =3D3D
> 2000
> Terminal server in NT Domain            =3D3D20
>                     thin-bounce@fre
> 
>                     elists.org
> 
> =3D3D20
> 
> =3D3D20
> 
>                     05.04.2003
> 
>                     01:19
> 
>                     Please respond
> 
>                     to thin
> 
> =3D3D20
> 
> =3D3D20
> 
> 
> 
> 
> 
> Hopefully, some one knows what this is.
> 
> I've opened a case with Microsoft 4 months ago, and they 
> still have yet =
> =3D3D
> =3D3D3D to figure out that it is.=3D3D3D20
> 
> Problem:  At anytime during the day, a terminal server, 
> running Citrix, =
> =3D3D
> =3D3D3D will report the following error in the event log:
> 
> The session setup to the Windows NT or Windows 2000 Domain Controller
> \\PRCPDC for the domain PRCWF is not responsive.  The current 
> RPC call =
> =3D =3D3D
> =3D3D3D from Netlogon on \\PRC-MF5 to \\PRCPDC has been cancelled.
> 
> 
> This server has about 30-40 users on it and when this 
> happens, everyone
> get's completely locked up.  I cannot log into the server in 
> console =3D =
> =3D3D3D
> =3D3D mode. I have to power it off and reboot. =3D3D3D20
> 
> I have a PDC and BDC.  If I leave the console logged in and 
> this =3D3D3D =
> =3D =3D3D
> happens, I
> can ping both PDC/BDC by IP, by name and I can NBTSTAT -A IP. 
>    I ran a
> sniffer for a while and sent them in to Microsoft for 
> examination.  This =
> =3D3D
> =3D3D3D was 3 weeks ago.  I've been handed around to 3 techs 
> and they =
> claim
> =3D3D3D everything looks fine in my DNS/WINS.  I even edited 
> a lmhosts. =
> File
> to point =3D3D3D directly to the PDC....I need heklp on =3D this. It =
> happens to
> 4 =3D3D of my servers all
> running:
> 
> Compaq Proliant DL series (380 & 360)
> Windows 2000 w/ SP3
> Citrix MF 1.8 w/ FR-1 sp2+
> Connected to a Cisco 4003 switch.
> 
> 
> 
> 
> Need help on this.
> 
> Joe
> 
> ********************************************************
> This Week's Sponsor - Emergent Online
> EOL's Universal Printer new Features include:
> Network Printing, Pagestreaming, 2400 DPI.
> No Client Software Required!
> http://www.go-eol.com/
> **********************************************************
> 
> For Archives, to Unsubscribe, Subscribe or
> set Digest or Vacation mode use the below link:
> http://thethin.net/citrixlist.cfm
> 
> 
> 
> 
> ********************************************************
> This Week's Sponsor - Emergent Online
> EOL's Universal Printer new Features include:
> Network Printing, Pagestreaming, 2400 DPI.
> No Client Software Required!
> http://www.go-eol.com/
> **********************************************************
> 
> For Archives, to Unsubscribe, Subscribe or=3D3D20
> set Digest or Vacation mode use the below link:
> http://thethin.net/citrixlist.cfm
> 
> ********************************************************
> This Week's Sponsor - Emergent Online
> EOL's Universal Printer new Features include:
> Network Printing, Pagestreaming, 2400 DPI.
> No Client Software Required!
> http://www.go-eol.com/
> **********************************************************
> 
> For Archives, to Unsubscribe, Subscribe or=3D20
> set Digest or Vacation mode use the below link:
> http://thethin.net/citrixlist.cfm
> ********************************************************
> This Week's Sponsor - Emergent Online
> EOL's Universal Printer new Features include:
> Network Printing, Pagestreaming, 2400 DPI.
> No Client Software Required!
> http://www.go-eol.com/
> **********************************************************
> 
> For Archives, to Unsubscribe, Subscribe or=20
> set Digest or Vacation mode use the below link:
> http://thethin.net/citrixlist.cfm
> 
> ********************************************************
> This Week's Sponsor - ThinPrint
> Simply the best print solution for
> Microsoft Terminal Services 
> and Citrix Metaframe.
> http://www.thinprint.com/
> **********************************************************
> 
> For Archives, to Unsubscribe, Subscribe or 
> set Digest or Vacation mode use the below link:
> http://thethin.net/citrixlist.cfm
> This e-mail message has been scanned for Viruses and cleared by RAV
> Antivirus!
> This e-mail message has been scanned for Viruses and cleared by RAV
> Antivirus!
> 
> ********************************************************
> This Week's Sponsor - ThinPrint
> Simply the best print solution for
> Microsoft Terminal Services 
> and Citrix Metaframe.
> http://www.thinprint.com/
> **********************************************************
> 
> For Archives, to Unsubscribe, Subscribe or 
> set Digest or Vacation mode use the below link:
> http://thethin.net/citrixlist.cfm
> 
********************************************************
This Week's Sponsor - ThinPrint
Simply the best print solution for
Microsoft Terminal Services 
and Citrix Metaframe.
http://www.thinprint.com/
**********************************************************

For Archives, to Unsubscribe, Subscribe or 
set Digest or Vacation mode use the below link:
http://thethin.net/citrixlist.cfm

Other related posts: