[THIN] Re: SSL error

  • From: "Jason Patten" <jasoncitrix@xxxxxxxxx>
  • To: thin@xxxxxxxxxxxxx
  • Date: Fri, 11 Apr 2008 11:00:44 -0400

We appear to have cleared up the problem after re-adding the STA servers
that had been upgraded, as well as I found a couple of IP addresses that
werent valid any longer and removed them.


On Wed, Apr 9, 2008 at 12:06 PM, Jason Patten <jasoncitrix@xxxxxxxxx> wrote:

> OK. I did that for 2 of the machines early this morning. I will check the
> others against the upgrade list and re-add them as soon as possible
>
>
> On Wed, Apr 9, 2008 at 12:00 PM, Andy Friar <Andy.Friar@xxxxxxxxxxx>
> wrote:
>
> >  Would be advisable.
> >
> >
> >
> > Rgds
> >
> >
> >
> > Andy
> >
> >
> >
> > *From:* thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] *On
> > Behalf Of *Jason Patten
> > *Sent:* 09 April 2008 16:56
> > *To:* thin@xxxxxxxxxxxxx
> > *Subject:* [THIN] Re: SSL error
> >
> >
> >
> > after upgrading from 4. 4.5 do we need to remove and re-add a server to
> > the STA list even if it maintains the same IP address?
> > We have 3 servers in each of our CSG/WI machines which run in a NLB
> > configuration.
> > Each CSG/WI machine has its own set of STA servers it points too.
> >
> > EG. csg1 points to servers 1,2,3  csg2 points to servers 4,5,6  etc.....
> > if we upgrade server 4 does it need to be removed and re-added to the
> > STA list?
> >
> >
> >  On Wed, Apr 9, 2008 at 11:51 AM, Andy Friar <Andy.Friar@xxxxxxxxxxx>
> > wrote:
> >
> > More likely to do with a mismatch in the STA lists.
> >
> >
> >
> > Ensure that the CSG sta list match the web interface sta list.
> >
> >
> >
> > HTH
> >
> >
> > Andy
> >
> >
> >
> > *From:* thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] *On
> > Behalf Of *Jason Patten
> > *Sent:* 09 April 2008 16:47
> > *To:* thin
> > *Subject:* [THIN] SSL error
> >
> >
> >
> > We are in the process of migrating from Presentation server 4 to 4.5
> > (windows 2k3) We are doing it a few servers at a time in order to minimize
> > disruption to our clients. We alos use CSG/WI Since we started the migration
> > we have seen a steady increase in the number of users who get the "Cannot
> > connect to the CItrix SSL server, the server you have selected is not
> > accepting connections" error.  Could this be caused by the mixed version of
> > PS?  THe CSG/WI boxes have not yet been upgraded.
> > Typically after 2-3 attempts the user is able to login and I am not
> > getting any events in the error logs of the CSG boxes that I can see.
> > Any idea what I should be looking for?  While it is not yet critical,
> > the problem seems to be getting worse.
> >
> > Novus Group
> >
> > The Old Corn Mill
> >
> > Congleton Road
> >
> > Siddington
> >
> > Macclesfield
> >
> > Cheshire
> >
> > SK11 9JR
> >
> >
> >
> > 01260 292 500
> >
> > http://www.novus.co.uk
> >
> >
> >
> > The information in this E-Mail is intended for the named recipients only. 
> > It may contain privileged and confidential information.
> >
> > If you are not the intended recipient you must not copy, distribute or take 
> > any action or place reliance on it.
> >
> > If you have received this E-Mail in error, please notify the sender 
> > immediately by using the E-Mail address and then delete the message.
> >
> > The views expressed in this message are personal and not necessarily those 
> > of Novus Networks Ltd. Novus Networks Ltd, Company Registration: GB 3858005.
> >
> >
> >
>
>

Other related posts: