[THIN] Re: PLEASE remove from all lists I am getting HUNDREDS of emails a day

  • From: "Sullivan, Edward" <Edward.Sullivan@xxxxxxxxxxxx>
  • To: "'thin@xxxxxxxxxxxxx'" <thin@xxxxxxxxxxxxx>
  • Date: Thu, 16 Sep 2004 21:22:00 -0500

Outlook Rules

 -----Original Message-----
From:   kevin fletch [mailto:kvfltch@xxxxxxxxx]
Sent:   Thu Sep 16 20:01:41 2004
To:     thin@xxxxxxxxxxxxx
Subject:        [THIN] PLEASE remove from all lists I am getting HUNDREDS of
emails a day


--- Jeff Pitsch <jpitsch@xxxxxxx> wrote:

> If you aren't using SSL on IIS (which you don't need
> to), you shouldn't
> need to move the 443 port.  After removing the cert,
> did you tell IIS
> not to use SSL?
> 
> Jeff Pitsch
> 
> 
> -----Original Message-----
> From: thin-bounce@xxxxxxxxxxxxx
> [mailto:thin-bounce@xxxxxxxxxxxxx] On
> Behalf Of Lambert, Ryan
> Sent: Thursday, September 16, 2004 10:50 AM
> To: thin@xxxxxxxxxxxxx
> Subject: [THIN] Re: CSG/WI on same box.
> 
> Got it.
> 
> Had to move to SSL on IIS to 444 and manually put in
> a redirect.
> 
> All is well.
> 
> -----Original Message-----
> From: thin-bounce@xxxxxxxxxxxxx
> [mailto:thin-bounce@xxxxxxxxxxxxx] On
> Behalf
> Of Lambert, Ryan
> Sent: Thursday, September 16, 2004 10:08 AM
> To: thin@xxxxxxxxxxxxx
> Subject: [THIN] Re: CSG/WI on same box.
> 
> Hi Jeff,
> 
> So... I've removed the cert from my Default web site
> for WI, and only
> have
> csg.mycompany.com configured through CSG Service
> Configuration.
> 
> ie: No certificate set up in IIS.
> 
> I'm allowing anonymous access to my Default Web
> Site. Still being
> prompted
> with that Windows authentication box, and when I log
> in, redirected to
> https://csg.mycompany.com/iisstart.asp
> 
> 
> Blech.
> 
> 
> -----Original Message-----
> From: thin-bounce@xxxxxxxxxxxxx
> [mailto:thin-bounce@xxxxxxxxxxxxx] On
> Behalf
> Of Jeff Pitsch
> Sent: Thursday, September 16, 2004 10:01 AM
> To: thin@xxxxxxxxxxxxx
> Subject: [THIN] Re: CSG/WI on same box.
> 
> With CSG 2/WI 2 you only need 1 cert.  CSG 2 will
> proxy all https
> communication to the WI.  Make sure the WI site is
> setup to allow
> anonymous access.
> 
> Jeff Pitsch
> 
> -----Original Message-----
> From: thin-bounce@xxxxxxxxxxxxx
> [mailto:thin-bounce@xxxxxxxxxxxxx] On
> Behalf Of Lambert, Ryan
> Sent: Thursday, September 16, 2004 9:54 AM
> To: thin@xxxxxxxxxxxxx
> Subject: [THIN] CSG/WI on same box.
> 
> Hey all,
> 
>  
> 
> We had this discussion in a different thread
> yesterday, and I've been
> attempting to get CSG/WI 2.0 working on the same box
> in a lab. No luck!!
> 
>  
> 
> This is my setup:
> 
>  
> 
> IIS 5.0 on CSG/WI server.
> 
> CSG on ip1:443 (csg.mycompany.com cert, 1024)
> 
> WI on ip2:443 (citrix.mycompany.com cert, 1024)
> 
> STA on Metaframe Server inside secured network.
> 
>  
> 
> Looks good when I do Secure Gateway Diag, everything
> checks out.
> 
>  
> 
> However, when I connect to https://csg.mycompany.com
> <https://csg.mycompany.com/> , I am prompted for a
> username and
> password.
> Odd.
> 
>  
> 
> When I enter the Admin username/password, I'm
> directed to a page that
> says
> no default document is set up. Again odd. I can hit
> http://citrix.mycompany.com/Citrix/MetaframeXP and
> get the default NFuse
> Page just fine. but IIRC, I'm supposed to be
> connecting to
> https://csg.mycompany.com
> <https://csg.mycompany.com/>  via browser. I
> know
> that there is a certificate installed on my WI
> Website (under Default
> Web
> Site), albeit the machine is not answering on port
> 443.
> 
>  
> 
> The following error I see every time I issue
> 'iisreset':
> 
>  
> 
> The service could not bind instance 1.  The data is
> the error code. 
> 
> For additional information specific to this message
> please visit the
> Microsoft Online Support site located at:
> 
>  
> 
> Seems to me that I am having a conflict with SSL?
> 
>  
> 
> I've tried issuing the command cscript adsutil.vbs
> set
> w3svc/disablesocketpooling true, and it came back
> and acknowledged me.
> 
>  
> 
> Anyone have any thoughts on this, or can point me to
> a design document
> detailing WI2.0/CSG setup?
> 
>  
> 
> Thx,
> 
> Ryan
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
>
********************************************************
> This Weeks Sponsor triCerat:
> Have you had your fill of printing support calls,
> unauthorized apps
> running
> on unsecured Terminal Servers, profile headaches,
> and application
> performance problems? Join us and learn how you can
> have a less
> demanding
> on-demand enterprise!
> http://www.tricerat.com/?page=ents#register 
>
**********************************************************
> 
> Useful Thin Client Computing Links are available at:
> http://thin.net/links.cfm
> 
=== message truncated ===



                
_______________________________
Do you Yahoo!?
Declare Yourself - Register online to vote today!
http://vote.yahoo.com
********************************************************
This Weeks Sponsor triCerat:
Have you had your fill of printing support calls, unauthorized apps running
on unsecured Terminal Servers, profile headaches, and application
performance problems? Join us and learn how you can have a less demanding
on-demand enterprise!
http://www.tricerat.com/?page=events#register 
********************************************************** 
Useful Thin Client Computing Links are available at:
http://thin.net/links.cfm
***********************************************************
For Archives, to Unsubscribe, Subscribe or 
set Digest or Vacation mode use the below link:
http://thin.net/citrixlist.cfm

Other related posts: