Without checking… 2003 should detect all the hardware in a ML530 G1, and install OK first time. Check your BIOS / Firmware is up to date. Windows Update should find any hardware updates, and the latest HP Proliant Support Pack should install all the correct drivers. It should be very straight forward. If it isn’t, try: - SmartStart installation of the server - Phone Compaq (HP) support - Alt.sys.pc-clone.compaq.servers - Email me _____ From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of Armstrong, Robert Sent: dinsdag 7 december 2004 19:03 To: 'thin@xxxxxxxxxxxxx' Subject: [THIN] OT - Windows 2003 Server on Proliant ML530 G1 Greetings, Anybody running Windows 2003 server on an older Compaq Proliant ML530 G1? I have some questions about the install procedure that was used and if any pitfalls were encountered. Thanks! Robert Armstrong Manager of Information Technology Invesmart, Inc. 4550 Lena Drive, Suite 201 Mechanicsburg, PA 17055 p: (717) 591-8900 x132 f: (717) 591-9822 e-mail: HYPERLINK "mailto:robert.armstrong@xxxxxxxxxxxxx"robert.armstrong@xxxxxxxxxxxxx _____ This message may contain confidential and/or privileged information. If you are not the intended recipient or authorized to receive this for the intended recipient, you must not use, copy, disclose or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by sending a reply e-mail and delete this message. Thank you for your cooperation. _____ --- Incoming mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.804 / Virus Database: 546 - Release Date: 30/11/2004 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.804 / Virus Database: 546 - Release Date: 30/11/2004