[THIN] Re: FR2 Printing clarification
- From: "Schneider, Chad M." <CMSchneider@xxxxxxxxx>
- To: "'thin@xxxxxxxxxxxxx'" <thin@xxxxxxxxxxxxx>
- Date: Wed, 7 Aug 2002 07:40:43 -0500
I am having a hard time understanding.
I have FR2 and my printers still show client\client name\printer....
-----Original Message-----
From: Rowlandson, John [mailto:John.Rowlandson@xxxxxxxxxxxxx]
Sent: Tuesday, August 06, 2002 6:30 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: FR2 Printing clarification
ISSUE 1
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
It may be my issue with the new FR2 direct to print server printing...
With FR1 your client would autoconnect to a network print server
resulting in a mapping of client\%computername%\print01\syd50SE
With FR2 , citrix recongnises the printer and maps your client directly
to \\print01\syd50se
This problem is when a client connects over a slow link from a remote
office with 6 mapped printers, it tries to map a windows printer x6
which takes forever.
This cannot be turned off in the CMC.
I have a design request in which apparently has been approved to have
this turn off and on by print server..
Ie. I want my australian print servers to use this methond on good links
but my london office print server not to do this.
My work arounf was to make 1 server FR1 for my 2 overseas offices.
ISSUE 2
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
We found yesterday with an FR2 server users default printers can be
messed around with unless you are using the FR@ client 6.30.1050.
Ie usera logs in a their default printer is A
Userb logs in and their default printer is B
Sometimes this will also reset usera 's default printer to B also
HTH
John Rowlandson
-----Original Message-----
From: M [mailto:mathras@xxxxxxxxxxxxxxxx]=20
Sent: Wednesday, August 07, 2002 6:05 AM
To: Thin@xxxxxxxxxxxxx
Subject: [THIN] FR2 Printing clarification
Hi
I remember a post a few weeks ago about a problem with FR2 printing and
promptly lost it. I have also noticed a couple of posts today mentioning
FR2 issues.
Would someone mind clarifying the actual problem with FR2 printing is ?
I was talking to Citrix today and they knew nothing of any issues.
Thanks for your time.
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
This weeks Sponsor:
triCerat, Inc
ScrewDrivers fxp: Self Configuring Printer Driver with Bandwidth Control
Learn more at: http://www.tricerat.com/?page=3Dproducts&product=3Dsdfxp
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
For Archives, to Unsubscribe, Subscribe or=20
set Digest or Vacation mode use the below link.
http://thethin.net/citrixlist.cfm
===================================
This weeks Sponsor:
triCerat, Inc
ScrewDrivers fxp: Self Configuring Printer Driver with Bandwidth Control
Learn more at:
http://www.tricerat.com/?page=products&product=sdfxp
===================================
For Archives, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link.
http://thethin.net/citrixlist.cfm
===================================
This weeks Sponsor:
triCerat, Inc
ScrewDrivers fxp: Self Configuring Printer Driver with Bandwidth Control
Learn more at:
http://www.tricerat.com/?page=products&product=sdfxp
===================================
For Archives, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link.
http://thethin.net/citrixlist.cfm
Other related posts:
