Could it be the 9.x client is trying to use session reliability on port 2598 and the 7.1 is using ICA on 1494? Maybe the 2598 port is not open on the firewall? Matthew Shrewsbury, MCSE+Internet MCSE 2000 CCA Server+ Senior Network Administrator -----Original Message----- From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of Jonny Tobiassen Sent: Thursday, December 01, 2005 8:19 AM To: thin@xxxxxxxxxxxxx Subject: [THIN] Connectopn problem with latest ICA client and PS 4.0 Hello all, I have a problem driving me crazy: I have an application set on Presentation Server 4.0 and Cisco PIX FW with NAT. Everything is configured to work through FW. When using old ICA client, in this case v 7.1, everythng workes fine. I set up application set with TCP/IP and use alternate address. I find the application set and can connect. Problem is when using newest ICA client, v. 9.1. Exactly same settings. I can find application set, but connection times out. Error says: "There is no Citrix Metaframe configured on the specified address". But it works great with client v. 7.1. I dont understand what can be the problem. Any ideas?? mvh Jonny Tobiassen Hålogaland IKT-Senter AS Tlf. 770 42605 -- This message has been scanned for viruses and dangerous content by The MailScanner at Halogaland IKT Senter, www.hikt.no, and is believed to be clean. ************************************************ For Archives, RSS, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link: //www.freelists.org/list/thin ************************************************ ************************************************ For Archives, RSS, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link: //www.freelists.org/list/thin ************************************************