On a Compaq DL360 with a RAID-1 array using the integrated Smart Array Controller: Shut down the server normally, remove hard drive 1 (the one on the right) Boot up, press F2 for rebuild drive. When you get to the OS on the reboot, simply pop in another hard drive and let the mirror re-create. Now you can play around and mess things up....if you need to, shut down and remove both drives, then just put the old HD 1 in the RIGHT HD slot and boot up....voila you're back where you were. This can also be used to create a Citrix farm that is exactly the same on each server, just keep breaking the mirrors and bringing up a new server. Re-IP and rename and join your domain and you've got a carbon copy server. Cheers! Brian Claus The information contained in and transferred with this electronic message is intended only for the recipient(s) designated above, it is protected by law and it may contain information which is privileged and confidential. If you are not the intended recipient, you are hereby notified that any review, dissemination, distribution, copying or use of this message is unauthorized and strictly prohibited. If you have received this message in error, please notify WESCO Distribution, Inc. immediately at 412-454-4800. Thank you. *********************************************** For Archives, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link. http://thethin.net/citrixlist.cfm