[tfc_zino] Re: Zino settings for cinematographic shooting

  • From: "mark zebrowski" <dmarc-noreply@xxxxxxxxxxxxx> (Redacted sender "mzebrowski" for DMARC)
  • To: tfc_zino@xxxxxxxxxxxxx
  • Date: Fri, 2 Aug 2019 22:00:20 -0400

Thanks, Tom.
Stuff like this ... shared ... is why we have the TFC.
Good job.

Sent from my iPad

On Aug 2, 2019, at 6:38 PM, Tom Fontaine <tomfontaine1@xxxxxxxxx> wrote:

Mark Z had sent this out 

As recommended by someone on Facebook...for cinematography

10% on vertical and left/right and fore/aft

2% (really seems small) on gimbal pitch.

So - I decided to try some settings and shoot some video

This first video I set the YAW speed to 15% - the gimbal pitch speed to the 
2%,  Vertical to 15% (10 seemed too low to me) and horizontal to 30% (at 10% 
it seems you would not cover much ground!

https://www.youtube.com/watch?v=r11KtvO7e44&feature=youtu.be ;

My own thoughts as you watch this see what you think - I think the gimbal 
pitch speed of 2% is very smooth,  but a little too slow.  I think the yaw 
speed of 15% is too fast and their recommendation of 10% would be better.  I 
think the vertical even at 15% is too slow it took forever to get up to 
altitude.  And I think the 30% for the horizontal is too fast you can see I 
lowered it midway in the video.

Then today I shot this followup.

Yaw is at 10%,  gimbal pitch at 5%,  vertical at 20%,  and horizontal at 25%. 
https://www.youtube.com/watch?v=QQmKU5rmpyg

Draw your own conclusions about what you think would work best for you for 
smooth videos from the Zino.  

Tom 

Other related posts: